HOME / AUGREEN PRODUCT / AUGREEN Gypsum Self Floor Leveling

AUGREEN Gypsum Self Floor Leveling

AUGREEN Gypsum Self Floor Leveling

Get In Touch

AUGREEN HC-20M is a high performance, free flowing, self smoothing gypsum based self levelling compound designed for smoothing and levelling subfloors prior to the installation of floor coverings. The excellent levelling and smoothing properties of HC-20M

About This Product

About This Product

Key Facts

Product Information

AUGREEN HC-20M can be applied from depths of 10 – 60mm in one application without the need to add additional aggregate. HC-20M is flexible and it is suitable for use with underfloor heating systems.

Key Benefits

  • Crack Resistant/Hollow
  • Labour Saving/Improve Working Efficiency
  • Reduce Structural Loading
  • Low Wastage
  • Environmentally Friendly
  • Reduce Transportation Cost
  • Indoor Equilibrate Humidity
  • Superior Flame Retardant Property

Substrate Preparation

Substrate must be free from dust, loose particles, contamination, grease, shutter release agent that affecting the bonding of AUGREEN Gypsum Self Floor Leveling.

Hand Trowel - Mixing and Installation

  • All mixing equipment should be cleaned before use.
  • Pour the required amount of water into the mixing bucket. Only add clean water and do not use any additives.
  • Add AUGREEN Gypsum Self Floor Leveling to the water and mix by a slow speed, high torque mechanical whisk.
  • AUGREEN Gypsum Self Floor Leveling should be mixed to a smooth consistency.
  • ApplyAUGREEN Gypsum Self Floor Leveling to required thickness in layer (s).

Work should be prohibited if temperature below 5°C, rainy, snowy day, high wind speed.

Coverage

AUGREEN HC-20M
Every 1 kg of HC-20M can cover 1 mm thick, 0.0666㎡, or every 1.5 kg HC-20M can cover 1 mm thick, 1㎡.

Working Time

30 to 90 mins

Technical Specification

Technical Date HC-20M
Density kg/dm3 11 kg/dm3
Water Demand % 23%
Workable Time 60min
Time Open to Foot Traffic 6h
Material Consumption 90Kg/㎡ (60mm Thickness)
30M Flow Rate Loss 2mm
Initial Curing Time 90min
Final Curing Time 180min
24H Flexural Strength 2.7MPa
24H Compressive Strength 6.8MPa
Flexural Strength 7.9MPa
Compressive Strength 23.0MPa
Adhesion 1.2MPa
Shrinkage 0.03%
Thermal Conductivity  0.235  W/(m.K)

Storage

Should be stored in a dry place. The suggested storage time is up to 6-9 months when properly stored. All AUGREEN Gypsum Self Floor Leveling being stored on sites or in warehouses must be in good conditions, without any damages on the packages, and all packages must indicate the name of the manufacturer and trademarked product name.

Safety and Health

Always wear gloves, masks and goggles during mixing and application. AUGREEN Gypsum Self Floor Leveling is of a powder base material which may produce an allergic effect and irritation to eyes and skin. In case of contact with eyes, rinse immediately with water and seek medical assistance. In case of contact with eyes, rinse immediately with water and seek medical assistance.

Product Standard

JC/T 1023-2007

Related Video